MagnaSine by Enerdrive

MagnaSine by Enerdrive / MS-E

Enerdrive now offers two 230 VAC / 50 Hz pure sine wave inverter/charger options for mobile and off grid applications. The MS-E Series is powerful, easy-to-use, and best of all, cost effective.

Power Factor Corrected (PFC) Charger:

Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.

Easy-to-install:

Install the MS-E Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your utility power cable to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.

Features:

Pure sine wave:

Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.

Choices:

The MS-E Series comes in 12 and 24 volt configurations, allowing you to choose the model that is right for you.

Versatile mounting:

Mount the MS-E Series on a shelf, bulkhead, or even upside down.

Lightweight:

The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.

Multiple ports:

The MS-E Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.

Accessible design:

The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.

Convenient switches:

The MS-E Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.

Buy with ease:

The MS-E Series is backed by a two-year (24-month) limited warranty.


Inverter Specifications MS2712E MS4124E
Input battery voltage range 9 - 17 VDC 18 - 34 VDC
Nominal AC output voltage 230 VAC ±5% 230 VAC ±5%
Output frequency and accuracy 50 Hz ± 0.4 Hz 50 Hz ± 0.4 Hz
Total Harmonic Distortion (THD) < 5% < 5%
1 msec surge current (amps AC) 45 65
100 msec surge current (amps AC) 21 30
5 sec surge power (real watts) 4100 6300
30 sec surge power (real watts) 3750 5300
5 min surge power (real watts) 3600 4750
30 min surge power (real watts) 3500 4600
Continuous power output at 25° C 2700 VA 4100 VA
Rated input battery current 260 amps at 12.6 VDC 200 amps at 25.2 VDC
Inverter efficiency (peak) 86% 90%
Transfer time 16 mSec 16 mSec
Search mode (typical) 9 watts 9 watts
No load (120 VAC output, typical) 34 watts 30 watts
Waveform Pure Sine Wave Pure Sine Wave

 

Charger Specifications MS2712E MS4124E
Continuous output at 25° C 125 ADC 105 ADC
Charger efficiency 83% 88%
Power factor > .95 > .95
Input current at rated output (AC amps) 8.5 14

 

General Features and Capabilities
Transfer relay capability 30 amps AC
Five stage charging capability Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™
Battery temperature compensation Yes, 15 ft Battery Temp Sensor standard
Remote available (optional) Yes, ME-RC50
Internal cooling 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
Overcurrent protection Yes, with two overlapping circuits
Overtemperature protection Yes on transformer, MOSFETS, and battery
Conformal coating on PCB’s for corrosion protection Yes
Powder coated chassis & top for corrosion protection Yes
Stainless steel fasteners for corrosion protection Yes
Listings None
Warranty Two years

 

Environmental Specifications
Operating temperature -20° C to +60° C
Nonoperating temperature -40° C to +70° C
Operating humidity 0 to 95% RH non condensing

 

Physical Specifications
Dimensions (l x w x h) 34.9 cm x 32.1 cm x 20.3 cm
Mounting Shelf (top or bottom up) or bulkhead (vents up)
Weight 24.0 kg
Shipping weight 26.3 kg
Max operating altitude 4570 m

 

Back to Top

        Copyright 2009 © Enerdrive