Xantrex™ GT Grid Tie Solar Inverters
- High efficiency and energy harvest in a small modular design
- Lightweight, compact and easy to install
- Indoor and outdoor use
- Peak inverter efficiency
- Excellent thermal performance
- Wide range of MPPT-Tracking
EASY INSTALLATION
The Xantrex GT Series Inverters make life easier for installers of solar power systems. It\'s simple design and rugged IP54 rated enclosure make for a reliable and neat outdoor installation. Product mounting is simple with an easy to install back mounting plate. A quick and uniform installation for multiple inverters can be created allowing symmetry between units.
EXCEPTIONAL THERMAL PERFORMANCE
The GT Series deisgn is suited to high heat environments with it\'s large aluminium heat sink to keep it\'s electronics cool in even the hottest climates. The power rating of the Xantrex inverters are:
GT 2.8 model is rated up to 50ûC of constant AC power
GT 5.0 model is rated up to 40ûC of constant AC power
Xantrex GT-Series inverters also provide an easy method of maintenance and service. With no fan, there are no parts to replace, and with the heat sink visible to the front, simply clean out all the dirt and insects (mud wasps etc) with a broom on a regular basis.
HIGH LEVEL PV ENERGY HARVEST
Engineered to make the most of a PV grid tie system investment, the GT Series provides high power conversion efficiency, excellent thermal performance, and rapid Maximum Power Point Tracking. Regular efficiencies of around 96% are available from both GT-Series inverters.
SIMPLE INVERTER DISPLAY
Xantrex GT inverters come standard with a backlit 16-character two line Liquid Crystal Display (LCD). Useful for troubleshooting and system feedback, the LCD provides a variety of information including:
Daily and lifetime energy production
PV array voltage and current
Mains voltage and frequency
Time online selling today
Inverter fault messages
Two installer customisable screens (or two installer screens easily customised)
Using the XanbusTM communication in connection with the CAT5 Ethernet cables, each inverter display will report the output of the entire system in addition to individual inverter output.
THE GT SERIES IS COMPLIANT TO APPLICABLE AUSTRALIAN STANDARDS:
AS4777 AS3100
STANDARD COMMUNICATIONS
The Xantrex GT Series offers an isolated RS232 port and two Xanbus RJ45 communication ports. There are no additional communication ports or cards needed to connect a PC. The LCD can be used simultaneously, even when a PC is connected to the RS232 port. Xantrex offers the GT Solar Inverter Viewer software, which can be downloaded from our Web site. GT View is an exceptional program that allows you to view all the performance details of your solar system over an entire day, down to recording intervals well below 10 seconds; this provides the most reliable method of fault finding in any solar system.
| Electrical Specifications | GT 2.8-AU | GT 5.0-AU |
| Output | ||
| Maximum AC Power Output: | 2800 W | 5000 W |
| Note GT Power Ratings quoted at 50c for 2.8 and 40c for 5.0 | ||
| Peak inverter efficiency | 95% | 96% |
| Night time tare loss | 1 W | 1 W |
| Topology | HF, Isolated | |
| Input | ||
| DC input voltage range | 195 to 600 Vdc | 240 to 600 Vdc |
| Peak power tracking voltage range | 195 to 550 Vdc | 240 to 550 Vdc |
| Recommended PV array power | 3070 W | 5300 W |
| Mechanical Specifications | ||
| Operating temperature range | -25ºC to 65ºC | |
| Protection rating | IP54 | IP54 |
| Inverter weight | 19.5 kg | 22.3 kg |
| Inverter dimensions (H x W x D) | 597 x 403 x 136 mm | |
| General Data | ||
| Part number | 864-1030 | 864-1039 |
| Mounting | Wall mount (bracket included) | |
| Cooling | Convection (no fan) | |
| Display | RS 232 and two Xanbus RJ45 ports | |
| Communication interfaces | Backlit, two line, 16 character liquid crystal display | |
| Warranty | 5 year parts and labor (10 year extended warranty available) | |