The Magnasine by Enerdrive products are designed and produced in the USA utilizing a tried and proven robust design platform, by a leading manufacturer of premium inverter/chargers for Mobile and Renewable Energy applications. With more than 70 years of combined inverter manufacturing and design experience, which has resulted in the MagnaSine by Enerdrive range being one of the industry's most reliable and advanced inverter/chargers.
Magnasine by Enerdrive MS-E Pure Sine Wave Inverter / Charger's are ideally suited to RV Motorhome, Caravan, Marine and Stand Alone Power System applications. Both the 12 and 24 Volt MS-E Pure Sine Wave Inverter/Charger's are supplied with a fully functional LCD Remote Control Panel.

Install the ME series in four easy steps:

Simply connect the inverter's output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter's easy-to-reach terminal block, connect the batteries, and switch on the power.

The ME-RC remote control allows you to monitor and customize the operating parameters to your MagnaSine inverter/charger.
The ME-RC50 comes standard with a 50 foot, 4-conductor (twisted-pair) telephone cable and includes non-volatile memory (preserves adjustable settings, even if power to the remote or inverter is removed). The MagnaSine remote control has all of the programming and operation functions included in an easy-to-use package.

Features:

• USA Made and Proven Design
• Massive Inverter Surge Capacity
• High Output Charging
• Easy to Install
• 2 Year Warranty
• Low Frequency Transformer Inverter

ME-RC Displays:

• Battery Voltage
• Inverting
• Battery Charging Status
• Inverter Charger operating status and warnings
• DC Load Amps, DC Amps Consumed and State of Charge (if ME-BMK is being used)

Using the ME-RC Remote Control, you can program:

• Charging algorithm of the batteries
• Battery Capacity
• Battery Charge Efficiency Factor
• Mains Current Limiter
• Charging Rate
• Mains AC Drop Out and Cut In
• Power Save
• Search Watts
• Low Battery Cut Out

Inverter Specifications	MS2712E	MS4124E
Input battery voltage range	9 to 17 VDC	18 to 34 VDC
Absolute maximum DC input	25 VDC	35 VDC
Nominal AC output voltage	230 VAC ±5%	230 VAC ±5%
Output frequency and accuracy	50 Hz ± 0.4 Hz	50 Hz ± 0.4 Hz
Total Harmonic Distortion (THD)	< 5%	< 5%
Continuous power output (at 25° C)	2700 VA	4100 VA
Continuous AC output current (amps AC)	12	18
1 msec surge current (amps AC)	45	65
100 msec surge current (amps AC)	21	30
5 sec surge power (real watts)	4100	6300
30 sec surge power (real watts)	3750	5300
5 min surge power (real watts)	3600	4750
30 min surge power (real watts)	3500	4600
Maximum continuous input current	360 ADC	273 ADC
Inverter efficiency (peak)	86%	90%
HBCO/HBCI (High Battery Cut Out/In)	16.8 VDC/16.5 VDC	33.8 VDC/33.2 VDC
LBCO/LBCI (Low Battery Cut Out/In)	9.0 VDC (adj)/12.5 VDC	18.0 VDC (adj)/25.0 VDC
Series stacking for 230VAC	No	No
AC relay transfer time (minimum)	16 mSec
Power consumption - searching	9 watts
Power consumption - inverting (no load)	34 watts	30 watts
Output waveform	Pure Sine Wave
Charger Specifications	MS2712E	MS4124E
Continuous charger output at 25°C	125 ADC	105 ADC
Input current at rated output (AC amps)	8.5	14
Charger efficiency	83%	88%
AC input frequency range	40-60 Hz	40-60 Hz
AC input voltage range	115-268 VAC	115-268 VAC
Power factor	> 0.95	> 0.95
General Features and Capabilities (Both Models)
Transfer relay capability	30 amps AC
Five-stage charging capability	Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™'AA
Battery temperature compensation	Yes, 5 meters Battery Temp Sensor standard
Internal cooling	0 to 120 cfm variable speed drive using dual 92 mm brushless DC fans
Overcurrent protection	Yes, with two overlapping circuits
Over-temperature protection	Yes, on transformer, MOSFETS, and battery
Corrosion protection	PCB''D5s conformal coated, powder coated chassis/top, and stainless steel fasteners
Safety/certifications	CE compliance and C-Tick
Warranty	2 years
Operating temperature	-20°C to +60°C
Storage temperature	-40°C to +70°C
Operating humidity	0 to 95% RH non-condensing
Physical Specifications
Unit dimensions (l x w x h)	34.9 cm x 32.1 cm x 20.3 cm
Shipping dimensions (l x w x h)	47 cm x 44.5 cm x 31.8 cm
Mounting	Shelf or wall (vents not allowed to face downward unless ME-CB is installed)
Unit weight	24.5 kg
Shipping weight	27.2 kg
Max operating altitude	4570 m
Specifications @ 25°C - Subject to change without notice.