A BATTERY BASED SYSTEM FOR OFF-GRID AND BACKUP POWER APPLICATIONS
The XW Hybrid Inverter/Charger (XW) is a true sine wave inverter/charger that incorporates a DC to AC inverter, a battery charger, and an AC auto-transfer switch. It is the foundation for battery-based residential applications up to 18 kilowatts (kW), and commercial applications up to 36 kW in a three-phase configuration. Designed for off-grid and back-up applications, the XW can operate with generators and renewable energy sources to provide reliable power every time.
- True sine-wave with unprecedented surge capacity
- High-current multistage battery charger
- Field serviceable control boards
- 60 Amp dynamic maximum power point tracker
- Three-phase capability
- Three unit stackable design for increased power
- Automatic generator start function (Optional)
- Enclosed electronics for protection against humidity and vermin
- Available sizes: 6.0 / 48 volt, 45 / 48 volt, 4.0 / 24 volt
The XW System consists of several devices, components, and optional accessories that, when installed together, create a renewable energy power system that can be customized to suit off-grid or backup applications.
The complete Xantrex XW System consists of a high-efficiency XW Inverter/Charger, the XW Solar Charge Controller, the XW Automatic Generator Start and the XW System Control Panel.
Xantrex XW System Applications
Off-Grid Power
The Xantrex XW System can process multiple forms of incoming power, making it a popular choice for off-grid applications (those not connected to the grid), as it provides homes with a completely autonomous supply of electricity. Most applications use solar arrays, but a wind generator, micro-hydro generator, and/or a fuel generator can also be incorporated into the system.
Backup Power
Grid-connected homes can also benefit from the use of a Xantrex XW System as the inverter will automatically detect a grid failure and instantly switch to backup power stored in the battery bank. When the grid is active, the XW System will monitor and regulate battery charging to ensure the batteries are ready to supply backup power when the grid fails.
| Electrical Specifications | XW6048 230-50 | XW4548 230-50 | XW4024 230-50 |
| Continuous Output Power | 6000 W | 4500 W | 4000 W |
| Surge rating | 12000 W | 9000 W | 8000 W |
| Waveform | True sine wave | ||
| Peak efficiency | 95.4% | 95.6% | 94.0% |
| Idle consumption - search mode | <7 W | ||
| AC Connections | AC1 (grid), AC2 (generator) | ||
| Maximum AC pass through current | 56 A | ||
| Total harmonic distortion | < 5% at rated power | ||
| Typical transfer time | 8ms | ||
| DC input voltage range | 44 to 64 V | 44 to 64 V | 22 to 32 V |
| Continuous charge rate | 100 A | 85 A | 150 A |
| Power factor corrected charging | PF (0.98) | ||
| Mechanical Specifications | |||
| Mounting | Wall mount, backplate included. | ||
| Inverter dimensions (H X W X D) | 580 x 410 x 230 mm | ||
| Inverter weight | 57 kg | 52 kg | 52 kg |
| Supported battery types | Flooded (default) - Gel - AGM - Custom | ||
| Battery bank size | 100 to 10,000 Ah | ||
| Battert temperature sensor | Included | ||
| Non volatile memory | Yes | ||
| Multiple unit configurations | Single phase, up to 3 parallel units. Three phase: 2 units per phase | ||
| Warranty | 5 Years | ||